Lead time
2 working days
On the shelf
22 units
Line
Maker supply
Maker supply
Chinar Blade Blanks, set of three
Annealed profiles, holes drilled, heat treatment left to you.
Nothing is charged here. Orders are confirmed by reply with shipping and payment before anything is taken.
Three profiles — drop point, utility and small chef — laser cut from 80CrV2 and shipped soft at roughly 92 HRB. Bevels are scribed but not ground, and the tang holes are drilled to 3.2 mm for standard pins.
- Steel
- 80CrV2, annealed
- Stock thickness
- 3.6 mm
- Profiles
- Drop point, utility, small chef
- Pin holes
- 3.2 mm, pre-drilled
- Finish
- Mill scale, scribed bevel lines
- Quantity
- 3 blanks
Keeping this edge
Wash by hand and dry immediately. A dishwasher will not blunt the steel, but it will loosen the handle and dull the finish within a season.
Strop for thirty seconds after heavy use. That single habit pushes a full sharpening out from weekly to roughly every two months.
Return it once a year and we re-profile it to the original geometry free of charge — you cover postage only.